Chemical and Biological Explosive Processes Practice Exam

These questions are part of the practice quiz. Start practicing

• What equals an explosive event in HME?
• What does periodic monitoring consist of?
• Which technique uses detectors around a high-value target for warning?
• Which scan result indicates two or more possible matches?
• Which lab item functions as a general-purpose receiving container?
• What protects the operator from laser exposure?
• What should a sample accurately reflect?
• What technique finds extent and intensity of radiological contamination?
• The primary function of the Bounce and Bypass locate tool is to determine which feature?
• What device uses ultraviolet light to ionize particles for VOC determination?
• The warning and reporting system for chemical, biological, radiological, and nuclear hazards is abbreviated as?
• Which statement defines monitor in CBRN reconnaissance?
• What should be included on a sampling area sketch?
• What is used to transport a solid sample to the vial?
• Who plans and implements crew rotations?
• What must be set up and manned before entering hot/warm zones?
• What type of device is FirstDefender RMX?
• Which reconnaissance type mitigates CBRN threats while conducting missions?
• VOC is an acronym for which type of compounds?
• Who identifies what is needed to collect samples?
• What does 'identify' mean in CBRN reconnaissance?
• What is zig-zag monitoring?
• Which technique uses detectors throughout a geographic area?
• Which lab item is used to add material or filter?
• Which monitoring approach is used for general area sampling with periodic checks?
• What separates liquids from solids and is commonly used in the production of Homemade Explosives?
• Who exercises overall control of sample collection?
• Which forms of contamination include aerosols and vapor?
• Which describes the zones established before operations?
• What visual display indicates laser energy is exiting the RMX?
• What type of water-cooled condenser is suited for laboratory scaled refluxing?
• What is the default startup mode for the MultiRAE Pro?
• What are the four CBRN Locate techniques?
• What technique is used when entering a contaminated area?
• What technique determines rough limits of contamination?
• Which statement accurately describes the device’s primary field-use purpose?
• In energetic materials chemistry, which class of substances acts as starting materials?
• Which report covers reconnaissance, monitoring and survey results?
• What does mounted CBRN R&S provide?
• Which are the CBRN passive defense operational elements?
• In a low-oxygen environment, which factor most directly affects sensor readings?
• Which of the following best defines reconnaissance?
• What is placed across a sample container cap to indicate tampering?
• Which zone includes the incident command post and support operations?
• What is the field confirmatory confidence level?
• What is used to clean the tip?
• During PMCS of the TruDefender, which component should be inspected?
• Which technique uses detectors throughout a geographic area?
• Which sequence is used to arm the device in Arm Mode?
• What is the first step in planning a CBRN sampling mission?
• Which combination of sensors is commonly found on the MultiRAE Pro?
• Which report gives basic observer data?
• Which lab activity uses raw plant materials with chemical additives?
• How many threats can the MultiRAE Pro monitor at once?
• Which glassware is commonly used to filter materials or to add liquids during experiments?
• What concentrates chemical components with low level heat?
• When is a collection plan developed?
• If a sample container is not filled to the recommended level, what could occur?
• Which condition affects readings when oxygen levels are deficient?
• What does LEL stand for in gas detection terminology?
• Which indicator shows the batteries are almost depleted?
• Mounted CBRN R&S provides which of the following benefits?
• What are the different types of air-cooled condensers?
• What are two common sensors on the MultiRAE Pro?
• What is the primary means of warning forces and reporting hazards?
• Which of the following is an example of a shock-sensitive material?
• What are the forms of contamination?
• Which component is part of the user interface and should be inspected during PMCS?
• What does the survey form Course Leg do?
• If a portion of a contaminated area is marked with a single sign, what is the likely deficiency?
• What are two ways contaminated areas are marked?
• What is the minimum personnel required for a CBRN R&S element?
• Who maintains incident logs?
• Which statement describes the device's intrinsic safety status?
• What does continuous monitoring consist of?
• Which report gives basic observer data?
• Who is described as performing definitive identification?
• In chemical terminology, what is the process of mixing chemicals to form a new compound called?
• What types of monitoring are periodic and continuous?
• Which of the following represents the correct minimum vial sample volume?
• TruDefender FTIR is certified as which safety status?
• What does the survey form Nearside-Farside do?
• In CBRN sampling, which role typically determines which sampling supplies are required?
• Which factor can lead to unreliable readings in oxygen-deficient environments?
• What does 'collect' mean in CBRN reconnaissance?
• Which technique is used to determine both the extent and intensity of contamination?
• What is a hot zone?
• What is the minimum size of a dismounted reconnaissance element?
• What is the purpose of CBRN R&S?
• What CBRN sign kit improves hazard marking?
• What is the presumptive identification confidence level?
• Who performs definitive identification?
• Direct and indirect refer to what in monitoring techniques?
• How far away should approaching forces see markers?
• Which statement best defines surveillance?
• What does 'detect' mean in CBRN reconnaissance?
• In a survey requiring high accuracy, which technique is preferred?
• What does Bounce and Bypass locate?
• What is the initial entry element minimum personnel?
• What method provides early warning, tracking, and identification of a CBRN hazard?
• Which detector provides the measurement for Volatile Organic Compounds in ambient air with this device?
• Which indicator shows the batteries are completely depleted?
• Which statement best describes the primary objective of CBRN reconnaissance and surveillance?
• What limits interference during fresh air calibration?
• Which term refers to additives that enhance explosives?
• Which reconnaissance involves all routes and terrain within boundaries?
• What is the primary purpose of the FirstDefender RMX in field operations?
• If the sample compartment cannot be secured, what method should be used?
• What does EPDS stand for?
• How does the TruDefender identify chemicals?
• What is the definition of homemade explosives (HME)?
• Which entry element serves as emergency extraction and relief?
• Which reconnaissance mission is the most thorough CBRN reconnaissance?
• Which of the following is most appropriate for monitoring an entire zone within defined boundaries?
• Who initiates air monitoring?
• Which technique uses detectors around a high-value target for warning?
• Which zone is designated for the Command Post, support operations, and equipment staging?
• Which of the following is NOT listed as a key task for CBRN reconnaissance?
• What does the term observe mean in CBRN reconnaissance?
• What is the Scan Delay timer range?
• Which component should be inspected to ensure proper sampling in the system?
• Which component should be inspected on the MultiRAE Pro for proper sampling?
• Which statement defines observe in CBRN reconnaissance?
• Who prepares the area/site sketch?
• Which reconnaissance is focused on a line of communications?
• Before initiating field sampling, you should first examine existing site survey information.
• What techniques can be used to locate hazards?
• Which term describes movement along a line oriented 45 degrees from the start line?
• What are the steps to install a memory card in FirstDefender RMX?
• What survey technique serves as the PPE donning point?
• Which distillation type uses multiple stages to improve separation?
• Continuous monitoring consists of?
• Which reconnaissance mission would be most thorough in covering a large area?
• In a CBRN threat environment, which hazards are explicitly identified for consideration?
• What should you do if results are 'Similar Match' or 'No Matches Found'?
• What is the minimum number of markers to identify a contaminated area?
• What type of growth involves microorganisms without the presence of oxygen?
• Which of the following is NOT a listed confidence level in the identification process?
• What is the maximum immersion depth of FirstDefender RMX for 30 minutes?
• What is the passkey sequence for Arm Mode?
• Which reconnaissance is focused on a specific area?
• Which action should be performed as the first step in planning a CBRN sampling mission?
• Which term refers to the immediate area surrounding the hazardous materials incident?
• Which condenser design is the basic form for water-cooled condensers?
• What are the key tasks for CBRN reconnaissance?
• What zones are established before operations?
• What is the purpose of CBRNWRS?
• Across a sample container cap, which item is used to show tampering?
• Which zone is designated for decontamination activities?
• To collect coarse particulate matter, which tool is most appropriate?
• Which category of agents is least probable to be produced in clandestine laboratories according to the material?
• Which item is NOT a stated action or feature associated with TruDefender operations?
• The spacing interval of markers is between which values?
• What are the four types of distillation?
• In gas detector terminology, what does PID stand for?
• Which report passes information on actual contamination?
• Which indicator confirms the pump is operating properly?
• What is TruDefender FTIR?
• Which reconnaissance type is designed to confirm or deny the presence of suspected CBRN hazards within a given area?
• Periodic monitoring consists of?
• Which statement describes aerobic growth?
• What is a cold zone?
• What is the purpose of marking a contaminated area?
• How should multiple contamination markings be placed?
• What must be timely and accurate to ensure informed decision making?
• When the battery is completely depleted, how many LEDs blink per second?
• Which form is used to locate general boundaries?
• Which elements are essential on a sampling area sketch?
• CBRN R&S operations performed from a distant location through a communication link called?
• When should you release the MODE button during startup?
• Which elements are essential on a sampling area sketch?
• Which indicator would signal a clandestine laboratory in a chemical setting?
• What does 'quantify' mean in CBRN reconnaissance?
• Which report passes information on actual contamination?
• In a lab setting, which activity involves combining reagents to produce a new compound?
• The theater validation confidence level is described as which value?
• What is the purpose of the TruDefender?
• Which reconnaissance type would be least suitable for operations that require foot mobility?
• What defines the term mark in CBRN reconnaissance?
• Which lab item is used to accurately measure liquid reagents?
• Clandestine Labs can produce ___ and ___ agents, but ___ agents are least probable
• What boundary does the PPE donning point correspond to?
• Who conducts leader's reconnaissance and initial site assessment?
• Indirect CBRN monitoring occurs under which condition?
• Which form is used to determine contamination boundaries?
• What type of reconnaissance follows a road, railway, waterway, or direction of attack?
• Which of the following best describes HME composition?
• What is the minimum personnel in a CBRN R&S element?
• The MultiRAE Pro is intended for which atmosphere?
• Which statement defines mark in CBRN reconnaissance?
• The presumptive identification confidence level is described as which value?
• To minimize volatilization, how full should sample containers be filled?
• What is a warm zone?
• Which range is correct for the Scan Delay timer?
• Where is the library used for chemical identification stored?
• Calibration adjustment is made using what?
• Which method is used when accuracy is important?
• What is the minimum sample amount for vial sampling?
• What does Box survey determine?
• Which statement correctly describes zone reconnaissance?
• What hazards must be considered in the threat environment?
• Which of the following is a scan result type explicitly mentioned for TruDefender results?
• What does the survey form Bounce and Bypass do?
• In reconnaissance planning, which type would you use to gather information across a broad area including multiple routes?
• Which device uses ultraviolet light to ionize particles for VOC determination? (Alternate phrasing)
• The TruDefender FTIR safety certification is best described as which?
• What is the recommended initial EPDS standoff distance?
• What is the best reconnaissance type for areas conducive to foot movement?
• What is the marker spacing interval?
• What is the theater validation confidence level?
• The library used for chemical identification is stored where?
• Which is the default startup mode for the instrument?
• How many possible scan results are there?
• Who prepares equipment needed to collect samples?
• Which type of growth describes microorganisms thriving in the presence of oxygen?
• Which technique is used to locate hazards?
• What is the most basic design of a water-cooled condenser?
• The efficiency of hazard marking is enhanced by using what kit?
• Which lab item is typically used as a general-purpose container for liquids and is common in many laboratories?
• Which report gives reconnaissance, monitoring and survey results?
• Which equipment is used to separate liquids from solids in the context discussed?
• The field confirmatory confidence level is described as what?
• Which materials absorb laser energy and heat up the most?
• What is the maximum immersion depth of the TruDefender?
• What is performed before each mission on a TruDefender?
• What form will HME be in when mixing or reacting ingredients?
• What does the term monitor mean in CBRN reconnaissance?
• Which report passes NBC1 data?
• What is the purpose of area reconnaissance?
• Which statement best describes the two types of heating mantles found in a laboratory?
• What does the survey form Preselected Dose Rate do?
• A Box survey aims to determine what aspect of a contaminated area?
• During startup, you should release the MODE button when which event occurs?
• For a CBRN R&S element, the minimum number of personnel required is:
• Which report passes evaluated NBC1 data?
• What is the simplest and most precise monitoring technique?
• Which role is responsible for identifying required sampling supplies?
• Which term describes CBRN R&S operations conducted from a distant location via a communication link?
• Which tool is used to collect coarse particles?
• Readings on the device are dependent upon which factor?